Morphology of Bacteria and Microbial Physiology

Morphology of Bacteria and Microbial Physiology

Bacterial structure, microscopy, staining methods, growth, nutrition and factors affecting bacterial growth

1

Introduction to Bacteria

Bacteria are microscopic, single-celled prokaryotic organisms. They do not have a true nucleus or membrane-bound organelles.

Prokaryotic and Eukaryotic Cells

Prokaryotic cells
  • No true nucleus or nuclear membrane.
  • DNA is present in a nucleoid region.
  • Lack membrane-bound organelles.
  • Usually smaller, around 1–10 µm.
  • Contain 70S ribosomes.
Eukaryotic cells
  • Have a well-defined nucleus.
  • Contain membrane-bound organelles.
  • Have larger and more complex structures.
  • DNA is arranged in chromosomes.
  • Contain 80S cytoplasmic ribosomes.

Both cell types contain a plasma membrane, cytoplasm, genetic material and ribosomes.

Important: Bacteria are prokaryotes. Their genetic material is not enclosed within a nuclear membrane.
2

Size, Shape and Arrangement

Size of Bacteria

  • Bacteria are measured in micrometres (µm).
  • Many medically important bacteria measure approximately 0.2–1.5 µm in diameter and 3–5 µm in length.
  • 1 µm is equal to 1/1000 of a millimetre.

Main Shapes of Bacteria

CocciSpherical or round bacteria.
BacilliRod-shaped bacteria.
VibriosCurved or comma-shaped bacteria.
SpirillaRigid spiral-shaped bacteria.
SpirochaetesThin, flexible spiral-shaped bacteria.

Arrangement of Cocci

  • Diplococci: Occur in pairs.
  • Streptococci: Form chains.
  • Staphylococci: Form irregular grape-like clusters.
  • Tetrads: Arranged in groups of four.
  • Sarcinae: Arranged in packets, usually of eight cells.

Arrangement of Bacilli

  • May occur singly, in pairs or in chains.
  • Some bacilli form palisade arrangements.
  • Some bacteria produce spores under unfavourable conditions.
3

Microscopy

Microscopes are used to observe bacteria because they are too small to be seen with the naked eye. Different microscopes are selected according to the type of specimen and the details required.

Types of Microscopes

  • Simple microscope: Uses a single lens, such as a hand lens.
  • Compound light microscope: Uses multiple lenses to magnify the specimen. Stained preparations are commonly used. Its usual maximum magnification is approximately 1000×.
  • Phase-contrast microscope: Used to observe living, unstained microorganisms. It converts differences in light phase caused by variations in refractive index into differences in brightness.
  • Dark-field microscope: Useful for observing living, thin organisms that are difficult to see with an ordinary light microscope. The organism appears bright against a dark background.
  • Fluorescence microscope: Uses ultraviolet or other suitable excitation light. Fluorescent dyes make microorganisms glow against a dark background. It is useful in fluorescent antibody techniques.
  • Electron microscope: Uses electrons and electromagnetic lenses instead of ordinary light. It provides much greater magnification and resolution.
Types of electron microscope
  • Transmission electron microscope (TEM): Electrons pass through a thin specimen to show internal details.
  • Scanning electron microscope (SEM): Scans the specimen surface to show its surface structure.
Exam point: Phase-contrast microscopy is useful for living unstained organisms, while dark-field microscopy is particularly useful for thin organisms such as spirochaetes.
4

Staining Methods

Most bacteria are nearly colourless under an ordinary light microscope. Staining increases contrast and makes their shape and arrangement easier to observe.

Common Staining Methods

  • Simple staining: Uses one basic dye, such as methylene blue or basic fuchsin. All bacteria generally take up the same colour.
  • Negative staining: Uses Indian ink or nigrosin to stain the background, leaving bacteria unstained and visible against it.
  • Impregnation method: Uses metallic substances such as silver to make very thin structures visible, including spirochaetes and bacterial flagella.
  • Differential staining: Uses more than one stain to distinguish different groups of bacteria.

Gram Staining

Gram staining is a differential staining technique that separates bacteria into Gram-positive and Gram-negative groups according to differences in their cell wall structure.

Procedure

  • Crystal violet: Primary stain; colours bacteria purple.
  • Iodine: Acts as a mordant and helps retain the primary stain.
  • Alcohol or acetone: Decolourising agent.
  • Safranin: Counterstain; colours decolourised bacteria pink.
Gram-positive bacteriaRetain the crystal violet stain and appear purple or violet due to their thick peptidoglycan layer.
Gram-negative bacteriaLose the primary stain during decolourisation and take up safranin, appearing pink or red.

Acid-Fast Staining

  • Used mainly to identify bacteria such as Mycobacterium tuberculosis.
  • Acid-fastness is due to the high lipid content of the cell wall, particularly mycolic acids.
  • The modified Ziehl–Neelsen method uses carbol fuchsin, heat, acid-alcohol and a counterstain such as methylene blue.
  • Acid-fast bacteria retain the red primary stain, while non-acid-fast bacteria become blue after counterstaining.
Remember: Gram-positive bacteria appear purple, Gram-negative bacteria appear pink, and acid-fast bacilli retain the red carbol fuchsin stain.
5

Structure of a Bacterial Cell

Bacterial structures are divided into essential structures, which are necessary for normal cell function, and additional structures that provide special advantages.

Essential Structures

1. Cell Wall

  • A rigid layer outside the plasma membrane.
  • Maintains the shape of the bacterium and protects it from osmotic damage.
  • Most bacterial cell walls contain peptidoglycan, also called murein.
Peptidoglycan: A strong mesh-like substance made of alternating N-acetylglucosamine (NAG) and N-acetylmuramic acid (NAM), joined by short peptide chains.

Gram-Positive Cell Wall

  • Has a thick peptidoglycan layer.
  • Contains teichoic acid and lipoteichoic acid.
  • Generally lacks an outer membrane.

Gram-Negative Cell Wall

  • Has a thin peptidoglycan layer.
  • Contains an outer membrane with lipopolysaccharide (LPS).
  • Has a periplasmic space between the inner and outer membranes.
  • Outer membrane proteins and porins help control the movement of substances.

2. Cell Membrane

  • Located immediately beneath the cell wall.
  • Acts as a selectively permeable barrier.
  • Controls the movement of nutrients and waste products.
  • Contains enzymes involved in important metabolic processes.

3. Cytoplasm

  • Gel-like material present inside the cell membrane.
  • Contains water, proteins, salts, enzymes and other substances.
  • Site of many metabolic reactions.

4. Nuclear Material and Ribosomes

  • Nucleoid: Contains the main bacterial DNA, usually a single circular double-stranded DNA molecule without a nuclear membrane.
  • Plasmids: Small extra-chromosomal DNA molecules that may carry antibiotic resistance or other special genes.
  • Ribosomes: 70S structures responsible for protein synthesis.

Additional Cell Structures

  • Capsule: Usually made of polysaccharide and forms an outer protective covering. It helps bacteria resist phagocytosis, drying and certain harmful substances. It can be demonstrated by negative staining.
  • Flagella: Long, thread-like structures responsible for bacterial movement. They consist of a filament, hook and basal body. Flagella contain flagellin and may act as antigens.
  • Pili and fimbriae: Short, thin protein structures. They help bacteria attach to host cells and surfaces. Sex pili take part in bacterial conjugation.
  • Endospores: Highly resistant resting structures formed by certain bacteria during unfavourable conditions. They help the organism survive heat, drying and other adverse conditions.
Flagellar arrangements
  • Monotrichous: One flagellum at one end.
  • Lophotrichous: A tuft of flagella at one end.
  • Amphitrichous: Flagella at both ends.
  • Peritrichous: Flagella distributed over the entire surface.

Endospore Structure and Other Forms

  • An endospore mainly contains a core, cortex and protective spore coat.
  • Spores may be central, subterminal or terminal in position.
  • Protoplast: A bacterial cell from which the cell wall has been completely removed, commonly by lysozyme action.
  • Spheroplast: A bacterial cell with a partially damaged or removed cell wall.
Important: Capsules protect against phagocytosis, flagella provide motility, pili help in attachment and conjugation, and endospores help bacteria survive unfavourable conditions.
6

Bacterial Growth and Multiplication

Binary Fission

Bacteria usually multiply by binary fission, in which one bacterial cell divides into two daughter cells.
  • The bacterial DNA replicates.
  • The cell elongates and the two DNA copies move apart.
  • A septum forms in the middle of the cell.
  • The parent cell separates into two daughter cells.

Generation time is the time required for a bacterial cell to divide and produce two cells.

Examples of generation time mentioned in the notes:
  • E. coli – approximately 20 minutes.
  • Tubercle bacilli – approximately 20 hours.
  • Lepra bacilli – approximately 20 days.

Types of Bacterial Culture

  • Batch culture: Bacteria grow in a fixed amount of medium. Nutrients gradually decrease and waste products accumulate.
  • Continuous culture: Fresh nutrients are continuously supplied and used medium is removed. Systems include chemostats and turbidostats.
  • Colony: A visible group of bacterial cells growing on solid culture medium, usually derived from a single parent cell.

Bacterial Growth Curve

When bacterial numbers are measured at regular intervals and plotted against time, a characteristic growth curve is obtained.

1. Lag phaseBacteria adjust to the new environment. There is little or no increase in cell number.
2. Log phaseBacteria multiply rapidly by repeated cell division. Growth is exponential.
3. Stationary phaseNutrient supply becomes limited and waste products accumulate. New cell formation and cell death become approximately equal.
4. Decline phaseMore cells die than are produced, so the number of living bacteria decreases.

Measurement of Bacterial Growth

  • Total count: Counts all cells, including living and dead cells, using microscopy or cell-counting instruments.
  • Turbidity measurement: Estimates bacterial growth by measuring the cloudiness of a culture using a nephelometer or similar instrument.
  • Viable count: Estimates living bacteria by counting colonies formed on solid culture media.
Exam focus: The four phases of the bacterial growth curve are lag, log, stationary and decline.
7

Bacterial Nutrition

Water makes up approximately 80% of the bacterial cell weight. The remaining material includes proteins, carbohydrates, lipids, nucleic acids, salts and other compounds.

Basic Nutritional Requirements

  • Water.
  • Carbon source for building cellular material.
  • Nitrogen source for proteins and nucleic acids.
  • Inorganic salts and minerals.
  • Additional growth factors when required.

Classification Based on Nutritional Requirements

PhototrophsObtain energy from sunlight.
ChemotrophsObtain energy from chemical reactions.
AutotrophsUse inorganic carbon sources to produce organic compounds.
HeterotrophsDepend on preformed organic compounds for their carbon requirements.

Growth Factors

Some bacteria require small quantities of particular organic substances for proper growth. These are called growth factors or bacterial vitamins.

  • Essential growth factors: Must be supplied because the organism cannot grow without them.
  • Accessory growth factors: Improve growth but are not absolutely necessary.

Examples include thiamine, riboflavin, nicotinic acid, pyridoxine, folic acid and vitamin B12.

8

Factors Affecting Bacterial Growth

1. Oxygen Requirement

  • Aerobes: Require oxygen for growth.
  • Anaerobes: Grow in the absence of oxygen.
  • Facultative anaerobes: Can grow with or without oxygen.
  • Microaerophiles: Grow best at lower oxygen concentrations than those present in normal air.

2. Temperature

  • Psychrophiles: Grow best at low temperatures, generally below 20°C.
  • Mesophiles: Grow best at moderate temperatures, commonly around 25–40°C. Most human pathogens belong to this group.
  • Thermophiles: Grow best at higher temperatures, commonly around 55–80°C.
Clinical importance: Many human pathogens grow best near 37°C, which is close to normal human body temperature.

3. Moisture and Drying

  • Water is essential for bacterial metabolism and growth.
  • Drying may kill sensitive bacteria, while some organisms can survive for long periods.
  • Endospores can remain viable in dry conditions for many years.

4. Hydrogen Ion Concentration (pH)

  • Most human pathogens grow best at neutral or slightly alkaline pH, approximately 7.2–7.6.
  • Acidophiles: Prefer acidic conditions.
  • Neutrophiles: Grow best near neutral pH; most human pathogens belong to this group.
  • Alkaliphiles: Prefer alkaline conditions.

5. Light and Radiation

  • Most bacteria grow well in darkness.
  • Ultraviolet light and other forms of radiation can damage bacterial cells.
  • Prolonged exposure to sunlight may destroy bacterial cultures.

6. Osmotic Pressure

  • Bacterial cell walls help protect cells against changes in osmotic pressure.
  • Hypertonic solution: Water leaves the cell, causing shrinkage of the cytoplasm. This is called plasmolysis.
  • Hypotonic solution: Water enters the cell and may cause swelling or rupture, known as plasmoptysis.

7. Mechanical and Sonic Stress

Strong mechanical forces, such as grinding or vigorous shaking with glass beads, can damage and break bacterial cells. Sonic energy may also disrupt cells.

Clinical relevance: Temperature, moisture, pH, oxygen availability and osmotic conditions influence bacterial survival and multiplication. These principles are important in microbiology, sterilisation and infection control.