Mandibular 2nd molar

Dental Anatomy

Mandibular Second Molar

The mandibular second molar supplements the mandibular first molar in function. It has a characteristic four-cusp crown, two roots and a distinct occlusal pattern.

General Features

Mandibular Second Molar

The mandibular second molar is normally slightly smaller than the first molar, although variations may occur.

01

General Characteristics

  • The mandibular second molar supplements the first molar in function.
  • Normally, it is smaller than the first molar by a fraction of a millimeter in its dimensions.
  • This size difference is not absolute. Some mandibular second molars may have crowns that are slightly larger than first-molar crowns.
  • Although the roots are not as well formed as those of the first molar, they may sometimes be longer.
  • The crown has four well-developed cusps: two buccal and two lingual.
  • The four cusps are nearly equal in development.
  • A distal cusp or fifth cusp is not evident.
  • The distobuccal cusp is larger than the corresponding cusp of the first molar.
  • The tooth has two well-developed roots: one mesial and one distal.
  • Both roots are broad buccolingually, but they are not as broad as the roots of the first molar.
  • The two roots are also less widely separated than those of the first molar.
Key identification feature:

A four-cusp crown with two buccal and two lingual cusps, together with two relatively close roots, is characteristic of the mandibular second molar.

Crown and Root

Buccal Aspect

02

Crown Features

  • The crown is somewhat shorter cervico-occlusally than the crown of the first molar.
  • It is also narrower mesiodistally than the first molar.
  • The crown and root show a tendency toward greater overall length, although they are not always actually longer.
  • Only one developmental groove is present on the buccal surface.
  • This is the buccal developmental groove.
  • The groove acts as a line of demarcation between the mesiobuccal and distobuccal lobes.
  • The mesiobuccal and distobuccal cusps are about equal in their mesiodistal measurements.
  • The buccal cervical line may point sharply toward the root bifurcation.

Root Form

  • The roots may be shorter than those of the first molar.
  • Root development varies considerably.
  • The roots are usually closer together than those of the first molar.
  • Their long axes are nearly parallel.
  • In some teeth, the roots may spread to a degree similar to those of the first molar.
  • In other teeth, the roots may be fused for part or all of their length.
  • The roots are inclined distally in relation to the occlusal plane of the crown.
  • Their axes form a more acute angle with the occlusal plane than the roots of the first molar.
Root relationship:

When the mandibular molars are considered together, the first molar shows less root angulation to the occlusal plane, the second molar shows a more acute angle, and the third molar shows an even more acute angle.

Lingual Surface

Lingual Aspect

03

Important Features

  • The crown and root converge lingually to a slight degree.
  • Because of this convergence, little of the mesial or distal surfaces can be seen from the lingual aspect.
  • The mesiodistal measurement at the cervical region is greater lingually than that of the first molar.
  • The mesial and distal crown curvatures that form the contact areas are more noticeable from the lingual aspect.
  • These contact areas are positioned at a slightly lower level than those of the first molar.
  • The difference is particularly noticeable in the distal contact area.
Identification point:

The slight lingual convergence and the more noticeable contact-area curvatures are important features when the tooth is viewed from the lingual aspect.

Proximal Surface

Mesial Aspect

04

Crown Features

  • In general form, the mandibular second molar differs relatively little from the first molar when viewed from the mesial aspect.
  • The buccal cervical ridge on the crown is usually less pronounced.
  • The occlusal surface may appear more constricted buccolingually.
  • The cervical line shows less curvature.
  • Buccolingually, the cervical line is relatively straight and regular in outline.

Root Features

  • The mesial root is somewhat pointed at its apical end.
  • If part of the distal root is visible, its position may differ depending on the direction from which the tooth is viewed.
  • When the distal root is viewed from the mesial aspect, it may appear buccally in relation to the mesial root.
Proximal Surface

Distal Aspect

05

Distal Features

  • The distal aspect is generally similar in form to that of the first molar.
  • The mandibular second molar does not have a distal cusp.
  • The distobuccal developmental groove is an important feature of the buccal surface.
  • The contact area is centered on the distal groove buccally.
  • The contact area is positioned approximately equidistant from the cervical line and the marginal ridge.
Distal identification:

The absence of a distal cusp, together with the characteristic groove and contact-area position, helps distinguish the mandibular second molar.

Occlusal Anatomy

Occlusal Aspect

The occlusal surface shows several characteristic features and may occur in different fissure patterns.

06

General Occlusal Features

  • The occlusal aspect differs considerably from that of the first molar.
  • The mandibular second molar commonly has four cusps: two buccal and two lingual.
  • The cusps are nearly equal in development.
  • The small distal cusp characteristic of some mandibular molars is not present.
  • The distobuccal cusp is larger than the corresponding cusp of the first molar.
  • The cusp slopes on the occlusal surface are not as smooth as those of the first molar.
  • The cusp ridges may be crossed by supplemental grooves that radiate from the developmental grooves.

Occlusal Outline and Buccal Features

  • Many mandibular second molars have a rectangular occlusal outline.
  • A considerable cervical prominence may be present on the mesiobuccal lobe only.
  • The outline of the crown is commonly more curved distally than mesially.
  • This gives the distal outline a semicircular form compared with the more square mesial outline.
  • The cusp ridge of the distobuccal cusp lies buccal to the cusp ridge of the mesiobuccal cusp.
Developmental groove pattern:

The buccal and lingual developmental grooves meet the central developmental groove at right angles at the central pit. Together, these grooves form a cross-like pattern and divide the occlusal surface into four nearly equal parts.

Common Fissure Patterns

The mandibular second molar may show different occlusal fissure patterns according to the number of cusps.

4-cusp Y pattern Four-cusp molars may have a Y-shaped fissure pattern.
4-cusp + pattern Four-cusp molars may also show a cross-like or plus-shaped fissure pattern.
5-cusp pattern Five-cusp molars may show a Y-type pattern when the fissures form the characteristic arrangement.
5-cusp + pattern A five-cusp molar may also have a plus-type fissure arrangement.
6-cusp variation A six-cusp variation is also described.
7-cusp variation A seven-cusp variation has also been described, occurring between the mesiolingual and distolingual cusps.
Fissure-pattern principle:

In the four-cusp forms, the fissure arrangement may resemble either a Y or a plus sign. The distinction depends on the relationship of the developmental grooves on the occlusal surface.

Morphological Variations

Important Variations

Several variations may occur in the mandibular second molar and can be useful for identifying individual teeth.

Root Size Roots may be relatively short or may be longer despite being less well formed.
Root Separation Roots may remain close together, spread apart, or become fused.
Root Fusion Fusion may involve part or all of the root length.
Crown Size Although usually smaller than the first molar, some crowns may be slightly larger.
Cusp Number Four cusps are typical, but additional cusp variations may occur.
Occlusal Pattern Y-shaped, plus-shaped and other cusp-related fissure variations may occur.

Features Seen in Uncommon Forms

  • The mesiodistal measurements at the contact areas may be equal to the cervical measurements.
  • The roots may be twisted or may have extra lengths.
  • Very small crowns may occur.
  • The roots may be short or fused.
  • The roots may show excessive curvature.
  • Mesial developmental features may be more or less pronounced.
  • A mesial developmental depression may be absent.
  • The roots may be unusually large.
  • The occlusal surface may be constricted buccolingually.
  • The crown may be wider mesiodistally at the cervical region.
Development

Developmental Milestones

07

Development

First evidence of calcification 2½–3 years
Enamel completed 7–8 years
Eruption 11–13 years
Root completed 14–15 years

Dimensions

Cervico-occlusal crown length 7.0 mm
Root length 13.0 mm
Mesiodistal crown diameter 10.5 mm
Mesiodistal diameter at cervix 8.0 mm
Labio-/buccolingual crown diameter 10.0 mm
Labio-/buccolingual diameter at cervix 9.0 mm
Cervical curvature — mesial 1.0 mm
Cervical curvature — distal 0.0 mm
Quick Revision

Key Points to Remember

Crown Usually slightly smaller than the first molar, with four well-developed cusps.
Cusps Two buccal and two lingual cusps, nearly equal in development.
Distal Cusp A distal or fifth cusp is normally absent.
Roots Two roots, usually closer together and less widely separated than those of the first molar.
Buccal Groove A single buccal developmental groove separates the mesiobuccal and distobuccal lobes.
Occlusal Pattern The developmental grooves commonly form a cross-like arrangement.