Permanent vs Primary dentition
Primary and Permanent Dentition
General, macroscopic and microscopic differences between primary and permanent teeth
1
General Features
Primary dentition consists of 20 teeth, while the
permanent dentition consists of 32 teeth.
The two dentitions differ in number, eruption, size, shape and structural features.
Primary Dentition
- Total of 20 teeth.
- 10 teeth in each arch.
- 5 teeth in each quadrant.
- Each quadrant has 2 incisors, 1 canine and 2 molars.
- There are no premolars or third molars.
- Dental formula: 2 incisors, 1 canine and 2 molars per quadrant.
Permanent Dentition
- Total of 32 teeth.
- 16 teeth in each arch.
- 8 teeth in each quadrant.
- Each quadrant has 2 incisors, 1 canine, 2 premolars and 3 molars.
- Third molars are present.
- Dental formula: 2 incisors, 1 canine, 2 premolars and 3 molars per quadrant.
Duration and eruption
Primary dentition
The deciduous dentition period lasts approximately from 6 months to 6 years.
Permanent dentition
The permanent dentition period begins around 6 years and continues thereafter.
Primary eruption
Primary teeth begin to erupt at about 6 months. By approximately 2½–3 years, the complete primary dentition is present.
Permanent eruption
Permanent tooth eruption begins around 6 years, with the exception of the third molars, which erupt later.
Eruption sequence
Primary teeth:
The sequence is represented as A → B → D → C → E.
Permanent teeth:
Maxillary sequence: 6 → 1 → 2 → 4 → 5 → 7, with the third molar following later.
Mandibular sequence: 6 → 1 → 2 → 3 → 4 → 5 → 7.
2
Crown Features
Size and color
Primary Teeth
- Smaller overall than their permanent counterparts.
- Crowns and teeth are generally smaller in overall dimensions.
- Teeth appear lighter in color.
- They appear bluish-white or milky white.
Permanent Teeth
- Larger in overall dimensions.
- Permanent teeth are generally yellowish-white or grayish-white.
- The color is darker compared with primary teeth.
Crown shape and cervical region
- Primary crowns are wider mesiodistally in relation to their crown height.
- This produces a relatively squat or compressed appearance.
- Permanent anterior crowns appear longer because their cervicoincisal height is greater in relation to mesiodistal width.
- Primary teeth show greater cervical constriction.
- The neck of a primary tooth is narrower and the cervical region is more pronounced.
- Permanent crowns show less cervical constriction.
Cervical ridge:
Cervical ridges on the buccal surface of primary crowns are more prominent,
especially on primary first molars. Permanent crown cervical ridges are flatter.
Incisors
Primary incisors
Do not show mamelons.
Permanent incisors
Newly erupted permanent incisors show mamelons.
Primary crown width
Primary incisors are noticeably wider mesiodistally in relation to their cervicoincisal height.
Permanent crown form
Permanent incisors are longer cervicoincisally than they are wide mesiodistally.
Canines
- Primary canines tend to be more conical.
- The cusp tip of a primary canine is more pointed and sharp.
- Permanent canines are less conical.
- The cusp tips of permanent canines are less pointed.
Premolars and molars
- There are no premolars in the primary dentition.
- There are two premolars in each quadrant of the permanent dentition.
- Primary dentition has two molars in each quadrant.
- Permanent dentition has three molars in each quadrant.
Primary molar size:
The crown of the primary second molar is larger than the crown of the primary first molar.
In permanent dentition, the first molar is larger than the second and third molars,
and crown size gradually decreases from the first to the third molar.
Primary molar crown form
Primary molars are more bulbous and bell-shaped, with marked cervical constriction. The pronounced cervical bulge is particularly noticeable on the buccal surface of primary first molars.
The pronounced cervical contour of primary molars is important during restorative procedures.
The cervical form should be reproduced during restoration, and the sharp cervical constriction
should be considered when forming the gingival floor of a Class II cavity preparation.
3
Occlusal Features
Occlusal table and surface
Primary Molars
- Buccal and lingual surfaces of primary molars converge occlusally.
- The convergence is especially pronounced in primary first molars.
- This produces a relatively narrow occlusal table.
- Primary molars are functionally adapted to withstand less occlusal load.
- Occlusal cavity preparations should therefore remain narrow buccolingually.
Permanent Molars
- There is less convergence of the buccal and lingual surfaces toward the occlusal surface.
- The molars therefore have broader occlusal tables.
Occlusal plane
- The occlusal plane of primary teeth is relatively flat.
- Permanent teeth have a more curved occlusal contour with more intricate design.
Grooves
- Primary teeth have more supplemental grooves.
- The increased number of grooves can contribute to food lodgment.
- Primary molars are more prone to caries.
- Pits and fissures of primary teeth are susceptible to decay.
- Permanent teeth have fewer supplemental grooves.
Because primary molars have broad contacts and pronounced occlusal features,
cavity preparations and restorations require attention to the characteristic primary tooth morphology.
Occlusal cusp pattern of primary and permanent molars
Primary upper first molar
3 cusps and resembles a premolar.
Primary upper second molar
4 cusps plus an accessory cusp and resembles the permanent upper first molar.
Primary lower first molar
4 cusps and does not resemble a permanent tooth.
Primary lower second molar
5 cusps and resembles the permanent lower first molar.
Permanent upper first molar
4 cusps plus an accessory cusp.
Permanent upper second molar
4 cusps.
Permanent lower first molar
5 cusps.
Permanent lower second molar
4 cusps.
4
Roots and Supporting Features
Root size and shape
Primary Teeth
- Primary roots are more delicate.
- They are proportionately longer and more slender compared with crown size.
- Primary molar roots are narrower mesiodistally.
- The roots flare markedly from the cervical region toward their tips.
- This flaring provides space for the developing permanent tooth buds between the roots.
- Primary roots undergo physiologic resorption.
Permanent Teeth
- Permanent roots are stronger.
- They provide good anchorage in the jaw bone.
- They are shorter and more bulky in relation to crown size.
- Permanent roots are broader mesiodistally.
- Marked root flaring is absent.
- Physiologic root resorption is absent.
Root trunk and furcation
- In primary molars, furcation is positioned more cervically.
- This makes the root trunk relatively small.
- In permanent molars, furcation is positioned more apically.
- The permanent molar root trunk is therefore larger.
Key difference:
Primary molar roots flare outward considerably to accommodate the developing permanent tooth buds.
Permanent molar roots are stronger and less markedly flared.
5
Pulp and Root Canal Features
Pulp chamber
Primary Teeth
- Pulp chambers are proportionately larger in relation to crown size.
- The pulp outline follows the dentinoenamel junction more closely.
- Pulp horns, especially the mesial horns of primary molars, are higher and closer to the outer surface.
- Primary pulp horns are more pointed and longer than the corresponding cusps would indicate.
Permanent Teeth
- The pulp chamber is smaller in relation to crown size.
- The pulp outline follows the dentinoenamel junction less closely.
- Pulp horns are comparatively lower and farther from the outer surface.
Because primary pulp chambers and pulp horns are relatively large and close to the outer surface,
cavity preparations in primary teeth should be kept shallow to reduce the risk of pulp exposure.
Root canals
- Primary root canals are more ribbon-like.
- They follow a thin, tortuous and branching path.
- Multiple ramifications of the primary pulp can make complete debridement difficult.
- Permanent root canals are better defined and show less branching.
Accessory canals
- The floor of the primary pulp chamber is more porous.
- Accessory canals in primary molars may directly lead to inter-radicular areas.
- Inflammation or infection from the pulp can therefore reach the periodontium more easily.
- Infection may also affect the developing permanent successor.
- Damage to the enamel of the developing permanent tooth may result from such infection.
- Permanent pulp chamber floors do not have many accessory canals.
Apical foramen
- The apical portion of the primary canal is less constricted than that of the permanent tooth.
- The apical foramen of primary teeth is therefore wider.
- Permanent canals have a more constricted apical portion and a smaller, narrower apical foramen.
6
Enamel Features
Primary Enamel
- Thinner and approximately 1 mm thick.
- Relatively uniform in thickness.
- At the cervical third, enamel rods are directed occlusally rather than gingivally.
- Incremental lines of Retzius are less common.
- Primary enamel is less mineralized and contains more organic content.
- The enamel is more prismatic.
Permanent Enamel
- Approximately 2–3 mm thick.
- Thickness is not uniform.
- At the cervical region, enamel rods are directed apically.
- Lines of Retzius are more common.
- Enamel is highly mineralized.
The difference in the direction of enamel rods at the cervical region is important
when considering the gingival margin during cavity preparation.
Mineralization and clinical relevance
- Primary enamel is less mineralized than permanent enamel.
- Primary teeth therefore require less pressure during cavity preparation.
- The depth of cavity preparation in primary teeth should be kept less.
- The longer etching time for primary enamel, approximately 90–120 seconds.
- For permanent teeth, the usual etching time stated is approximately 30 seconds.
7
Dentin Features
Primary Dentin
- Dentin is approximately half as thick as in permanent teeth.
- Comparatively greater thickness is present over the pulpal roof of primary molars.
- Dentin thickness is less over the pulpal wall of the occlusal fossa.
- Dental tubules are less regular.
- Interglobular dentin is absent.
Permanent Dentin
- Greater dentin thickness is present.
- Dental tubules are more regular.
- Interglobular dentin is present beneath the well-calcified mantle layer of dentin.
The relatively thinner dentin of primary teeth provides less protective tissue over the pulp.
Therefore, cavity preparation should be conservative in depth.
8
Cementum, Mineral Content and Neonatal Line
Cementum
Primary Teeth
- Cementum is thin.
- Only primary cementum is present.
- The ability of primary teeth to undergo resorption.
- Compared with primary teeth, permanent teeth are more firmly anchored in alveolar bone.
Permanent Teeth
- Cementum is thick.
- Both primary and secondary cementum are present.
Mineral content
- Both enamel and dentin of primary teeth are less mineralized and less dense.
- This difference contributes to the greater ease of cutting primary tooth tissues during operative procedures.
- Enamel and dentin of permanent teeth are more highly mineralized.
Neonatal line
Primary teeth
Neonatal lines are present in both enamel and dentin of all primary teeth.
Permanent teeth
Neonatal lines are seen only in the first permanent molar because its mineralization begins at birth.
Quick Revision
- Primary dentition contains 20 teeth; permanent dentition contains 32 teeth.
- Primary dentition has 2 incisors, 1 canine and 2 molars per quadrant.
- Permanent dentition has 2 incisors, 1 canine, 2 premolars and 3 molars per quadrant.
- Primary teeth are smaller, lighter in color and more cervically constricted.
- Primary crowns are wider mesiodistally in relation to crown height.
- Primary cervical ridges are more prominent, especially on primary first molars.
- Primary incisors do not have mamelons; newly erupted permanent incisors show mamelons.
- Primary canines are more conical with sharper cusp tips.
- Primary molars are more bulbous and bell-shaped with marked cervical constriction.
- Primary molars have more supplemental grooves and narrower occlusal tables.
- Primary molar roots are delicate, slender and markedly flared.
- Primary molar roots undergo physiologic resorption.
- Primary pulp chambers are proportionately larger and pulp horns are higher.
- Primary root canals are more ribbon-like, tortuous and branching.
- Primary apical foramina are wider.
- Primary enamel is thinner and less mineralized.
- Primary dentin is thinner and dental tubules are less regular.
- Primary cementum is thin and consists of primary cementum.
- Neonatal lines occur in enamel and dentin of primary teeth.
- In permanent teeth, neonatal lines are seen only in the first molar.