Dentin

Dentin

Organized study notes covering the properties, structure, dentinal tubules, dentin formation, types of dentin, sensitivity, age-related changes and important clinical features of dentin.

1 Physical and Chemical Properties

  • Dentin is viscoelastic and can undergo slight deformation.
  • In hardness, dentin lies between bone and enamel.
  • It is harder in the central region than near the pulp or peripheral region.
  • Dentin in primary teeth is harder than dentin in permanent teeth.
  • Dentin is more radiolucent than enamel because it contains less mineral.

Composition

Organic Component

About 35% is organic. Collagen, mainly Type I collagen, forms an important part of the organic matrix.

Inorganic Component

About 65% is inorganic and is mainly present as hydroxyapatite crystals.

Hydroxyapatite

The crystals are smaller than those of enamel and contain calcium, phosphate, carbonate and sulphate.

The organic and inorganic components can be separated by decalcification or incineration.

Proteins associated with dentin include collagen and other proteins such as osteocalcin and osteopontin.

2 Structure of Dentin

Dentin is organised around the dental tubules. The major structural components include the dentinal tubules, odontoblastic processes, peritubular dentin and intertubular dentin.

Peritubular and Intertubular Dentin

Peritubular Dentin

Forms the dentin immediately surrounding the dental tubules and is more highly mineralised.

Intertubular Dentin

Forms the main body of dentin between the dental tubules and contains the major collagen framework.

Odontoblastic Process

A cytoplasmic extension of an odontoblast that occupies the dental tubule.

Peritubular Dentin

  • It surrounds the dental tubules and forms their walls in most regions.
  • It is more mineralised than intertubular dentin by about 9%.
  • Collagen fibres are less clearly evident in the peripheral region compared with intertubular dentin.
  • Its thickness is approximately 0.75 μm in outer dentin and almost 0.4 μm in inner dentin.
  • It progressively constricts the dentinal tubules toward the dentinoenamel junction.

Lamina Limitans and Periodontoblastic Space

Lamina limitans is the inner organic lining of the calcified tubule. It contains glycosaminoglycan and is similar to the lining of lacunae in cartilage and bone.

A periodontoblastic space is present between the odontoblastic process and peritubular dentin. This space contains dental fluid.

The fluid has a higher potassium concentration and lower sodium concentration, and its movement is outward from the pulp.

Intertubular Dentin

Intertubular dentin forms the main body of dentin between the dental tubules.

  • Its matrix is mainly composed of collagen fibres arranged around the dental tubules.
  • Collagen fibres show cross-banding at about 64 nm.
  • Hydroxyapatite crystals are formed along the collagen fibres, with their long axes parallel to the collagen.

3 Dentinal Tubules and Odontoblastic Processes

Dental Tubules

Dentinal tubules are S-shaped and show a primary curvature. Their course begins approximately at a right angle from the pulp and becomes doubly curved.

  • The first curvature is directed toward the root apex.
  • Terminal branches arise near the ends of the tubules.
  • Branching is more extensive in root dentin than in coronal dentin.
  • The number of tubules per unit area is greater near the pulp than near the outer surface.
  • The approximate ratio of tubules near the pulp to the outer surface is 4 : 1.
  • Tubules are wider near the pulp, approximately 3–4 μm, and become about 1 μm toward the outer end.
  • The approximate ratio of dentin thickness near the pulp to the outer surface is 1 : 5.
  • Secondary curvatures are also present throughout the tubules.
  • Lateral branches, also called canaliculi or microtubules, are present throughout dentin and occur at intervals of approximately 1–2 μm.

Odontoblastic Process

Odontoblastic processes are cytoplasmic extensions of odontoblasts and contain microtubules.

  • Their diameter is greatest near the pulp, about 3–4 μm, and decreases to approximately 1 μm deeper in dentin.
  • Odontoblast cell bodies are about 40 μm long and 7 μm in diameter.
  • Their lifespan depends on the age of the tooth because differentiated odontoblasts do not undergo further division.
  • Some odontoblastic processes extend through the thickness of dentin.
  • In narrow or mineral-obliterated tubules, the process may be shortened.
A few dentinal tubules cross the dentinoenamel junction and extend into enamel. These are associated with enamel spindles.

4 Incremental and Special Features

Lines of Von Ebner

Lines of Von Ebner are fine lines running at right angles to the dentinal tubules.

  • They represent the daily rhythmic deposition of dentinal matrix.
  • A gap of about 20 μm represents approximately a 5-day interval of dentin formation.
  • Therefore, the daily deposition is about 4 μm.
  • The lines are farther apart in coronal dentin, about 8 μm, and closer together in radicular dentin, about 4 μm.

Contour Lines of Owen

Contour lines of Owen are accentuated incremental lines caused by disturbances in the matrix and mineralisation process.

They represent hypomineralised structures.

Neonatal Line

The neonatal line is an accentuated line separating prenatal and postnatal dentin.

  • It can be seen in permanent molars and deciduous teeth where dentin formation occurs partly before and partly after birth.
  • It reflects the abrupt environmental change occurring before and after birth.
  • Dentin formed before birth is generally of higher quality.

Tome’s Granular Layer

Tome’s granular layer is a granular zone adjacent to cementum, visible in ground sections of root dentin under transmitted light.

  • It results from coalescing and looping of the terminal portions of dentinal tubules.
  • The zone increases slightly in amount from the cementoenamel junction toward the root apex.
  • It remains unmineralised.

5 Dentinogenesis

Dentinogenesis is the process of dentin formation by odontoblasts. It begins at the cusp tips or incisal edges and progresses apically.

Odontoblast Differentiation

  • Differentiation is induced by the enamel organ, especially the inner enamel epithelium.
  • The inner enamel epithelium releases factors such as TGF, IGF and BMP.
  • These factors are taken up by preodontoblasts.
  • Preodontoblasts change from an ovoid to a columnar shape.
  • Their nuclei become basally oriented as they differentiate into odontoblasts.
  • The differentiation process begins from the apical end of the cell in contact with the basal lamina.

Matrix Formation

Odontoblasts first secrete predentin, which is an unmineralised organic matrix composed mainly of Type I collagen.

  • Initially about 4 μm of dentin is formed each day until the crown erupts and the teeth reach occlusion.
  • After this, dentin production slows to approximately 1 μm per day.

Mineralisation

  • Mineralisation begins about 24 hours after matrix deposition.
  • Calcium and phosphate combine to form hydroxyapatite crystals.
  • Mineralisation occurs in both globular and linear patterns.

Patterns of Mineralisation

Globular Pattern

Mineralisation occurs in separate globules that later become part of the dentin matrix.

Linear Pattern

Mineralisation is deposited along collagen fibres and progresses in a more continuous pattern.

Predentin

A 2–6 μm wide, unmineralised layer located next to the pulp.

As collagen fibres of predentin become mineralised, they become dentin and a new layer of predentin is formed continuously.

6 Types of Dentin

Primary Dentin

Primary dentin is the dentin formed before completion of the root. It consists mainly of mantle dentin and circumpulpal dentin.

Mantle Dentin

  • It is the first dentin formed in the crown below the dentinoenamel junction.
  • It is softer and provides cushioning to the tooth.
  • Its organic matrix contains larger collagen fibrils, approximately 0.1–0.2 μm.
  • Thicker collagen fibres are known as Korff’s fibres and mainly contain Type III collagen.
  • Mantle dentin is about 20 μm thick.
  • Compared with circumpulpal dentin, it is less mineralised and has fewer defects.
  • Circumpulpal dentin can mineralise through linear or globular patterns, whereas mantle dentin mineralises only through a globular pattern.

Circumpulpal Dentin

  • It forms the bulk of the tooth.
  • Its collagen fibres are smaller, approximately 0.05 μm, and are more closely packed.
  • It is slightly more mineralised.

Interglobular Dentin

When dentin mineralisation begins in small globular areas and these globules fail to unite into a homogeneous mass, hypomineralised areas remain between them. These areas are called interglobular dentin.

  • It can occur in the crowns of teeth, particularly in circumpulpal dentin.
  • Dentinal tubules pass continuously through it, showing that it represents a defect in mineralisation rather than matrix formation.
  • It occurs frequently in the cervical and middle thirds of the crown, followed by the intercuspal and coronal regions.
  • In roots, it occurs most frequently in the cervical third, followed by the middle third.

Secondary Dentin

Secondary dentin is a narrow band surrounding the pulp and is formed after completion of the root.

  • It contains fewer tubules than primary dentin.
  • It may be seen at the primary-secondary dentin interface.
  • It is formed more slowly than primary dentin.
  • Its formation is not uniform.
  • It occurs in greater amounts on the roof and floor of the coronal pulp chamber.
  • It helps protect the pulp from exposure in older teeth.
  • Its formation is not considered a response to external stimuli.

7 Age and Functional Changes

Vitality of Dentin

Because odontoblasts and their processes are integral parts of dentin, dentin is considered a vital tissue.

Its vitality refers to its capacity to react to physiological and pathological stimuli.

After teeth have erupted and functioned for some time, dentinogenesis becomes slower and further dentin formation occurs at a much slower rate.

Reparative / Tertiary Dentin

When dentin is injured by extensive abrasion, erosion, caries or operative procedures, odontoblasts may survive or may be destroyed depending on the intensity of injury.

  • If the original odontoblasts survive, the resulting dentin is described as reactionary or regenerated dentin.
  • If the odontoblasts are destroyed, they are replaced by newly formed odontoblasts that produce reparative dentin.
  • New odontoblasts differentiate from cells in the deeper pulp, including cells from the cell-rich zone or undifferentiated perivascular cells.
  • These cells migrate toward the dentin interface.
  • Their activity helps seal the injured area and supports resolution of the inflammatory process and removal of dead cells.
  • Tertiary dentin contains fewer and more twisted tubules than normal dentin.
  • It is also called irregular secondary dentin.
  • Dentin phosphoprotein is not present in this form of dentin.

Dead Tracts

When normal odontoblastic processes degenerate, the empty tubules become filled with air and form dead tracts.

  • They appear black in transmitted light and white in reflected light.
  • They may occur due to caries, attrition, abrasion, cavity preparation or erosion.
  • They are commonly found in areas where pulp horns are narrow because of crowding of odontoblasts.
  • They are seen more frequently in older teeth.

Sclerotic or Transparent Dentin

Sclerotic dentin develops when dentinal tubules become blocked as a defensive response to attrition, abrasion, erosion, cavity formation or caries.

  • Hydroxyapatite crystals appear inside the tubules and gradually obliterate their lumen with mineral.
  • The refractive indices of dentin and deposited mineral become similar, making the dentin appear transparent.
  • It is commonly seen in older individuals, particularly in roots or in slowly progressing caries.
  • Sclerosis reduces dentin permeability and increases protection of the pulp.
  • Sclerotic dentin has a higher mineral density than normal dentin.
  • Its elasticity remains relatively unchanged, although fracture toughness is reduced.
  • Age-related sclerotic dentin is harder than dentin formed in a carious lesion.
  • It appears transparent in transmitted light and dark in reflected light.

8 Nerve Supply and Dentin Sensitivity

Nerve fibres accompany approximately 30–70% of odontoblastic processes and are described as intratubular nerves.

Direct Neural Stimulation Theory

This theory proposes that nerves within dentin are directly stimulated.

It is not widely accepted because nerves rarely extend beyond the inner dentin, and topical local anaesthetics do not completely eliminate sensitivity.

Hydrodynamic Theory

The hydrodynamic theory is the most accepted explanation of dentin pain transmission.

Various stimuli cause movement of dentinal fluid inward or outward. This movement mechanically disturbs nerves closely associated with odontoblasts and produces pain.

Transduction Theory

This theory proposes that the odontoblastic process is excited by a stimulus and that the impulse is transmitted toward the nerve endings in inner dentin.

It is not considered popular because neurotransmitter vesicles capable of stimulating the nerve could not be demonstrated.

9 Clinical Considerations

Exposed dentin should be protected from bacterial toxins, strong drugs, unnecessary thermal changes and irritating restorative materials. It should be sealed with a non-irritating insulating substance.
  • Rapid penetration and spread of caries in dentin are related to its tubule system, which provides pathways for invading bacteria and their products.
  • Dentin sensitivity or pain may not appear as a symptom of caries until the pulp becomes infected and responds with inflammation.
  • During hypersensitivity, activation of the interdental nerve at the pulp-dentin interface is associated with centrifugal movement of dentinal fluid in response to stimuli.
  • Dentin sensitivity is more commonly observed in patients with periodontal problems.
  • The teeth most commonly affected are maxillary premolars, maxillary first molars and incisors.
  • Acidic drinks can cause erosion of peritubular dentin and removal of the smear plug, increasing dentin hypersensitivity.
  • Brushing immediately after acidic drink consumption promotes smear-layer formation, which reduces sensitivity.
  • Dentin hypersensitivity may be treated using dentifrices containing potassium nitrite or stannous fluoride, which block patent tubules.
  • Laser treatment has also been described, with varying success.

10 Quick Revision

  • Dentin is a viscoelastic tissue with hardness between bone and enamel.
  • Approximately 35% is organic and 65% is inorganic.
  • Type I collagen is the major collagen component.
  • Dental tubules form an important structural feature of dentin and contain odontoblastic processes and dental fluid.
  • Peritubular dentin surrounds the tubules and is more highly mineralised than intertubular dentin.
  • Intertubular dentin forms the main body of dentin and contains collagen fibres with hydroxyapatite crystals.
  • Lines of Von Ebner represent the daily rhythm of dentin deposition.
  • Contour lines of Owen are accentuated incremental lines associated with disturbances in matrix formation and mineralisation.
  • Dentinogenesis involves odontoblast differentiation, matrix formation and mineralisation.
  • Predentin is the unmineralised layer next to the pulp.
  • Primary dentin includes mantle dentin and circumpulpal dentin.
  • Interglobular dentin represents an area of incomplete mineralisation.
  • Secondary dentin forms slowly after root completion and surrounds the pulp.
  • Tertiary dentin forms as a response to dentinal injury.
  • Dead tracts result from degeneration of odontoblastic processes and filling of the empty tubules with air.
  • Sclerotic dentin results from mineralisation and obliteration of dentinal tubules.
  • The hydrodynamic theory is the most accepted explanation for dentin sensitivity.