Refractive errors

Refractive Errors

Refractive errors, ametropia, astigmatism and presbyopia

01

Refractive Errors

Refractive error is defined as an inability of eye to focus the image of objects accurately on retina.

02

Emmetropia

Emmetropia is the vision with lens of eye having normal refractive power.

An eye with normal refractive power is called emmetropic eye.

03

Ametropia

Any deviation in refractive power from normal condition resulting in inadequate focusing on retina is called ametropia and the eye is called ametropic eye.

The defect is due to change in shape of the eyeball.

Types of Ametropia

  1. Hypermetropia
  2. Myopia
04

Hypermetropia or Long Sightedness

Hypermetropia is the eye defect characterized by inability to focus on near object.

Hypermetropia is otherwise known as long sightedness because the person can see distant objects clearly, but not the near objects.

Causes of Hypermetropia

Hypermetropia is due to decreased anteroposterior diameter of the eyeball.

So, even though refractive power of lens is normal, the light rays are not converged enough to form a clear image on retina, i.e., light rays are brought to a focus behind retina.

It causes blurred image of near objects.

Hypermetropia occurs in childhood, if the eyeballs fail to develop to the correct size.

It is common in elders also.

Correction of Hypermetropia

Hypermetropia is corrected by using biconvex lens.

Light rays are converged by convex lens before entering the eye.

05

Myopia or Short Sightedness

Myopia is the defect characterized by inability of the eye to focus on distant object.

It is otherwise called short sightedness, because the person can see near objects clearly, but not the distant objects.

Far Point in Myopia

Normally, in emmetropia, the far point is infinite.

In myopia, the near vision is normal, but the far point is not infinite, i.e., it is at a definite distance.

In extreme conditions, it may be only a few centimeters away from the eye.

Causes of Myopia

In myopia, refractive power of the lens is usually normal.

But, anteroposterior diameter of the eyeball is abnormally long.

Therefore, the image is brought to a focus a little in front of retina.

In other words, refractive power of lens is too strong for the length of eyeball.

Light rays, after coming to a focus, disperse again, so a blurred image is formed upon retina.

Correction of Myopia

In myopic eye, in order to form a clear image on the retina, light rays entering the eye must be divergent and not parallel.

Thus, myopic eye is corrected by using biconcave lens.

Light rays are diverged by concave lens before entering the eye.

06

Anisometropia

Anisometropia is the condition in which two eyes have unequal refractive power.

It is corrected by using different appropriate lens for each eye.

07

Astigmatism

Definition

Astigmatism is a condition in which the light rays are not brought to a sharp point upon retina.

It is the common optical defect.

When it is moderate, it is known as physiological astigmatism.

When it is well marked, it is considered abnormal.

For example, the stars appear as small dots of light to a person with normal eye.

But in astigmatism, the stars appear as radiating short lines of light (a = not; stigma = point).

Cause of Astigmatism

Light rays pass through all meridians of a lens.

In a normal eye, lens has approximately same curvature in all meridians.

So, the light rays are refracted almost equally in all meridians and brought to a focus.

If the curvature is different in different meridians, vertical, horizontal and oblique, refractive power is different in different meridians.

Meridian with greater curvature refracts the light rays more strongly than other meridians.

So, these light rays are brought to a focus in front of the light rays, which pass through other meridians.

Such irregularity of curvature of lens causes astigmatism.

Types of Astigmatism

Astigmatism is of two types:

  1. Regular astigmatism
  2. Irregular astigmatism

Regular Astigmatism

In this type of astigmatism, the refractive power is unequal in different meridians of lens because of alteration of curvature in one meridian.

But it is uniform in all points throughout the affected meridian.

Irregular Astigmatism

In irregular astigmatism, the refractive power is unequal not only in different meridians of lens but it is also unequal in different points of same meridian.

Correction of Astigmatism

Astigmatism is corrected by using cylindrical lens having the convexity in the meridian corresponding to that of lens of eye having a lesser curvature.

i.e., if horizontal curvature of lens is lesser, the person should use cylindrical glass lens with convexity in horizontal meridian.

Refractive Errors: Cause and Correction

Type of Error Cause Correction
Myopia Increase in anteroposterior diameter of the eyeball Biconcave lens
Hypermetropia Decrease in anteroposterior diameter of the eyeball Biconvex lens
Anisometropia Difference in refractive power of both eyes Separate lens (biconcave or biconvex) for each eye as required
Astigmatism Refractory power of lens is different in different meridians Cylindrical lens
Regular astigmatism Refractory power of lens is unequal in different meridians but uniform in one single meridian Cylindrical lens
Irregular astigmatism Refractory power of lens is unequal in different meridians as well as in different points in same meridian Cylindrical lens
Presbyopia Loss of elasticity in lens and weakness of ocular muscles due to old age Biconvex lens
08

Presbyopia

Definition

Presbyopia is a condition characterized by progressive decrease in the ability of eyes to focus upon near objects with age.

It is due to the gradual reduction in the amplitude of accommodation.

Presbyopia starts developing after middle age and progresses as the age advances.

Vision in Presbyopia

In presbyopia, distant vision is unaffected.

Only the near vision is affected.

Near point is away from eye.

In presbyopia, the anterior curvature of lens does not increase during near vision.

So, light rays from near objects are not brought to a focus on retina.

Causes of Presbyopia

  1. Decreased elasticity of lens is because of the physical changes in lens and its capsule in elders. So, the anterior curvature is not increased during near vision.
  2. Decreased convergence of eyeballs due to the concomitant weakness of ocular muscles in elders.

Correction of Presbyopia

Presbyopia is corrected by using biconvex lens.

09

Quick Revision

Refractive Errors

  • Hypermetropia
  • Myopia
  • Anisometropia
  • Astigmatism
  • Presbyopia

Hypermetropia

Decreased anteroposterior diameter of eyeball → image behind retina → corrected by biconvex lens.

Myopia

Increased anteroposterior diameter of eyeball → image in front of retina → corrected by biconcave lens.

Anisometropia

Unequal refractive power of two eyes → different appropriate lens for each eye.

Astigmatism

Light rays are not brought to a sharp point upon retina → corrected using cylindrical lens.

Presbyopia

Progressive decrease in ability to focus upon near objects with age → corrected using biconvex lens.